Features :
- 1 device
- 1 Power Adapter
- 1 Quick Installation Guide
- 16 *10BASE-T / 100BASE-T Ethernet ports.
- Support 10 / 100Mbps automatic negotiation and
duplex mode. - Each port supports automatic MDI / MDI – X adaptive
crossover detection - Support full/half-duplex transmission mode is
10 / 100Mbps - Support storage and forwarding exchange;
- IEEE802.3i, IEEE 802.3u, IEEE 802.3az ,IEEE802.3x;
- Support hardware-based learning and aging;
- Supports 8192 MAC addresses;
- Built-in universal wide voltage power supply;
- Supports flow control, VLAN, and extend mode.
The DG-S1016D-E 10 / 100Mbps Fast Ethernet switch is ideal for integrating 10Mbps Ethernet and 100Mbps Fast Ethernet devices. All 16 ports are automatically negotiated and have automatic MDI / MDI-X adaptive crossover detection, so you do not have to worry about the type of cable. Each port can be negotiated independently to determine the best speed and half duplex or full duplex mode, up to 200Mbps per port bandwidth. Fast store-and-forward switching prevents damaged packets from continuing to be transmitted over the network.
With the Green Ethernet technology (802.3az), through the detection of cable length and workload, automatically adjust the signal strength, without reducing the performance of the equipment and the effectiveness of the case, effectively reduce energy consumption and protect the environment. Besides normal mode, flow control, VLAN and extend mode are supported.
MODEL NAME | DG-S1016D-E | |
CHIPSET | RLT8316E | |
STANDARDS & PROTOCOL | IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3az | |
INTERFACE | 16*10/100Mbps adaptive RJ45 ports (Auto MDI/MDIX) | |
INTERFACE | 10BASE-T: UTP category 3,4 cable (maximum 100m) 100BASE-TX: UTP category 5,5e cable (maximum 100m) | |
TRANSFER METHOD | Store-and-Forward | |
MAC ADDRESS TABLE | 8K | |
SWITCHING CAPACITY | 3.2Gbps | |
PACKET FORWARDING RATE | 2.38Gbps | |
PACKET BUFFER | 2Mbits | |
JUMBO FRAME | 2KBytes | |
Working Modes |
NORMAL | All ports can communicate with each other |
FLOW CONTROL | Flow control function close, all ports can communicate with each other | |
VLAN |
1~14 ports can not communicate with each other, but can communicate with 15~16 ports |
|
EXTEND |
Speed of 1~8 ports is reduced to 10 Mbps, transmission distance can reach 250m |
|
INDICATORS |
PER DIVICE | Power : Green |
PER PORT | Link / Act : Green | |
POWER CONSUMPTION | 2.75W (220V/50Hz) | |
DIMENSIONS (L X W X H) | 280 * 126 * 44 mm | |
ENVIRONMENT |
Operating Temperature: 0°C ~ 45°C Storage Temperature: -40°C ~ 70°C
Operating Humidity: 10% ~ 90% non-condensing Storage humidity: 5% ~ 90% non-condensing |