2.5″ SATA III 6Gbps – 256GB

Home Solid State Drive 2.5″ SATA III 6Gbps – 256GB

Features

  • High I/O and throughput performance.
  • Low power consumption.
  • Increased system responsiveness.
  • High reliability.
  • Enhanced ruggedness.
  • Support wear leveling.
  • Over-provisioning
  • Error checking and correcting. (ECC)
  • PIO mode : 0, 1, 2, 3, 4
  • UMDA mode : 0, 1, 2, 3, 4, 5, 6, 7

Description

The DIGICOM 2.5 inch SATA III SSD delivers the next generation storage solution with new low power features designed for best performance. The next generation DIGICOM SSD continues to provide high performance expected for Serial Advanced Technology Attachment (SATA)-based computers. The industry-standard 2.5-inch form factor enables interchangeability with existing hard disk drives (HDDs) and native SATA HDD drop-in replacement with the enhanced performance, reliability, and ruggedness offered by an SSD.

Specifications

MODEL DSD2.5-256GB
 

PARAMETER

 SEQ. READ (MAX) 540 MB/s
SEQ. WRITE (MAX) 490 MB/s
INTERFACE PROTOCOL SATA III 6 Gbps
 

TEMPERATURE

 OPERATING 0°C to 70°C
STORAGE -20°C to 75°C
PHYSICAL DIMENSION L: 100.4mm, W: 70mm, H: 7mm (error +-0.5mm)
WRITE ENDURANCE 100 GB/day; theoretically can use 8 years.
READ LIFE Unlimited
MTBF 1,500,000 hours
NATIVE COMMAND

QUEUING (NCQ)

 TRIM
HUMIDITY (Non-Condensing) RH 90% under 40°C (operational)
SHOCK 1500G Duration 0.5ms, Half Sine Wave

Pin Definition

Pin Pin Definition Pin Pin Definition
S1 GND P5 GND
S2 A+ P6 GND
S3 A- P7 5V
S4 GND P8 5V
S5 B- P9 5V
S6 B+ P10 GND
S7 GND P11 DAS/DSS
P1 / P12 GND
P2 / P13 /
P3 / P14 /
P4 GND P15 /

Power Consumption

Input Voltage : DC 5V (+-5%)

 

Test Project Power Consumption Unit
Idle (ref.) 0.39 W
Sequential Read (ref.) 1.36 W
Sequential Write (ref.) 1.34 W
Random Read (ref.) 1.25 W
Random Write (ref.) 1.15 W

26 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *